Ezy Flat Polisher

Ezy flat

FARNESE’S NEW INNOVATIVE SINGLE HEAD EDGE POLISHING MACHINE.

The EZY FLAT is a quick FLAT-EDGE polishing machine capable of only detailing flat edges. The design is similar to that of our world renowned Mitre Saw Exel. The polishing head and an interactive PLC distinguish the EZY Flat from the Mitre Saw. The machine is built with a sturdy table equipped with rollers that pop up to facilitate loading and unloading work pieces quickly and almost effortlessly. A pneumatic back stop swivels down to aid positioning the stone. Once the stone is positioned, a set of pneumatic clamps hold the stone firmly against the table. The anti-slip coin-spot rubber mat on the table ensures that the work piece does not move when the polishing head is working. The package also includes a seperate roller table that can be used to support long pieces when polishing the shorter edges.

The EZY FLAT is very simple to operate. The operator can set the feedrate and no of iterations for each polishing pad. A sequence of these polishing pads can be programmed. A maximum of six such programs can be stored in the PLC and reused when required. In most cases, a three step process is sufficient to polish most engineered stone available in the market.

All lubricating points are connected to a centralised greasing system to save time on greasing all the lubricating points individually. A few strokes of simple manual grease pump every day before use is sufficient to keep the machine well lubricated.

The team at Proform understands that buying stone machinery is a big decision, one that can be extremely costly when breakdowns occur and equipment don't run to full capacity. That’s why we provide our customers with unparalleled service and support for all machines throughout Australia. From on-site installation and training to after-sales telephone and in-person support and repairs, our professional sales and service team will keep your valuable asset running.

TECHNICAL DATA


POLISHING STROKE                              3300 mm (130 inch)

TOOL SIZE                                           100 mm (4 inch)

TABLE DIMENSIONS                             3400 X 600 mm

MOTOR RATING                                    2.5 HP

POWER RATING                                    415/380V 3PH 15AMP 50HZ (220V 3PH 21AMP 60HZ)


HYDRAULIC CAMLPING ARMS TO SECURE THE WORKPIECE

POP UP ROLLERS TO FACILITATE LOADING

PROGRAM MEMORY

CENTRALISED HAND LUBRICATION

 

Brochure (458k)
 
© 2019 Proform | Site map | Search | Terms & Conditions
Powered by Rainbow Creative | 20 Jun 2019 | Admin